Are you looking to save some time and money while improving the appearance of your home? Then what do you think about pressure washing? Like hiring pressure washing services. Well, pressure washing uses pressurized water to clean surfaces, making it easy to remove dirt, mould, mildew, and more from your exterior walls and paint job.
If you do not know how to use one safely, however, you could easily do more harm than good. Fortunately, with these 10 pressure washing tips and techniques in hand, you can increase the efficiency of your cleaning efforts while saving both time and energy – read on for more information!
10 Pressure Washing Tips for a Sparkling Home
1) The Right Tools for the Job
To ensure your home is sparkling clean, you will need to invest in the right tools. The most important tool to have is your pressure washer. Different jobs require different types of pressure washers with different PSI (Pounds per Square Inch) ratings, so make sure to purchase one that is suited for the job at hand.
For instance, if you are cleaning your garage door or driveway, you should buy a high-pressure washer that runs at 3000 PSI or higher.
2) Protect Your Plants
If you are looking to hire a pressure washing company, it is important to get the right pressure washing service for the type of surface that needs to be cleaned such as plants. For example, residential pressure washing services typically use less water than commercial pressure washing.
3) Use the Correct Nozzle
With the right pressure washing services, you can thoroughly clean any outdoor surface. You should always use a low-pressure nozzle when you are cleaning stone or brick surfaces. A high-pressure nozzle is better for other surfaces such as concrete or wood decks.
It is also important to keep your equipment in good shape by replacing worn hoses, washers, nozzles, and other parts on an annual basis.
If you need any help finding the right pressure washing services, do not hesitate to contact us today at MDI Painting Services.
4) Hold the Wand at the Right Angle
The wands on pressure washers are important, but they may not be the only thing that you need to get the right angle. Holding the wand at an angle will help you get into tighter areas like corners or siding. This is especially important if you have a smaller pressure washer with a smaller wand.
A pressure washer can help with this too by reaching higher areas more easily than hand-held pressure washers may be able to do.
5) Move the Wand in a Side-to-Side Motion
One of the most important aspects of pressure washing is the angle of your wand. You need to make sure that you are holding it at a 90-degree angle so that the water is hitting the surface where you want it to.
To do this, start by moving the wand back and forth across your desired area in a side-to-side motion until you have covered it completely.
6) Start at the Bottom and Work Your Way Up
For the best pressure washing results, start at the bottom of your home or building and work your way up. This will ensure that dirt, grime, mould, mildew, and other debris are removed before they have time to become embedded in the surface.
Use a low-pressure setting (3000 to 4000 PSI) with a 10-inch nozzle on your power washer.
7) Rinse Thoroughly
A good way to keep your pressure washing looking its best is to rinse thoroughly. It is important that you do not use too much water, but make sure that the water washes away any of the soap or cleanser. Rinse all surfaces of your home after pressure washing, especially if there is any dirt or debris stuck to it.
8) Be Careful of Overwashing
If you are noticing that your pressure washing needs are becoming more frequent, it may be time to hire commercial pressure washing services. These professionals will come to your home or business and power wash the grime off with the help of their specialized tools.
But even before you call them, there are some things you can do around the house to avoid overwashing. For instance, look out for tree sap when it rains, sap sticks to surfaces and is hard to remove without damaging paint or trim.
9) Avoid Harsh Chemicals
Pressure washing is the best way to clean your property because it uses environmentally friendly products that will not harm your family, pets, or the environment. Also, it is much safer than harsh chemicals that can potentially cause damage to your home.
10) Don’t Forget the Gutters!
No one wants to spend their hard-earned money on pressure washing services, commercial pressure washings, or pressure washing in Melbourne only to have the gutters get dirty again in no time. Gutters are an important part of your home’s exterior. They protect your roof from water damage and keep it in good shape!
And that’s it. Have fun!
